Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers.

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

Proximity hybridization induced bipedal DNA walker for label-free electrochemical detection of apolipoprotein A4 based on DNA meditated Ag nanoparticles growth.

Apolipoprotein A4 (Apo-A4) is considered as a prospective molecular biomarker for diagnosis of depression due to its neurosynaptic toxicity. Here, we propose a neighboring hybridization induced catalyzed hairpin assembly (CHA) driven bipedal DNA walker that mediates hybridization of Ag nanoparticles (Ag NPs) with DNA probes for highly sensitive electrochemical quantitative detection of Apo-A4. Driven by CHA, this bipedal DNA walker can spread all over the surface of the sensor, induce the HP1-HP2 double chain structure, make the surface of the sensor negatively charged, and adsorb a large number of Ag ions. After chemical reduction with hydroquinone, the Ag NPs formed provide signal tracers for electrochemical dissolution analysis of the target. The Ag NPs formed by chemical reduction of hydroquinone can provide signal traces for electrochemical stripping analysis of target thrombin. The linear range of this method is from 10 pg mL-1 to 1000 ng mL-1, and the detection limit is 5.1 pg mL-1. This enzyme-free and labeling detection method provides a new strategy for rapid clinical detection of Apo-A4 and accurate identification of depression.

Inverting the DNA tetrahedron: A novel strategy for sensitive and stable detection of aging-related enzyme MMP2.

In the current study, a novel electrochemiluminescence biosensor based on the entropy-driven DNA tetrahedron for the detection of matrix metalloproteinase 2 (MMP2), an enzyme that regulates extracellular matrix remodeling and affects aging was reported. The biosensor utilizes an inverted DNA tetrahedron structure, which exposes three vertices to the solution, as molecular recognition units for capturing specific biomolecules. The biosensor also employs a ratiometric method and an entropy-driven reaction, which enhance the response rate and sensitivity of the detection. The biosensor can detect MMP2 with a detection limit of 55.2 fM, which is lower than that of conventional sensors. The biosensor also exhibits excellent stability and reproducibility, and can accurately measure MMP2 levels in complex samples, such as human serum. The paper demonstrates the feasibility and effectiveness of using the "inverted" DNA tetrahedron structure and the entropy-driven process to construct interfacial biosensors. The paper also discusses the potential applications of the biosensor in clinical diagnosis and anti-aging research, where MMP2 plays a crucial role in tissue damage and repair. The paper provides a valuable contribution to the field of biosensor development, and opens up new possibilities for using DNA nanotechnology for sensitive and reliable detection of various biomolecules.

Electrochemical biosensor strategy combining DNA entropy-driven technology to activate CRISPR-Cas13a activity and triple-stranded nucleic acids to detect SARS-CoV-2 RdRp gene.

By merging DNA entropy-driven technology with triple-stranded nucleic acids in an electrochemical biosensor to detect the SARS-CoV-2 RdRp gene, we tackled the challenges of false negatives and the high cost of SARS-CoV-2 detection. The approach generates a CRISPR-Cas 13a-activated RNA activator, which then stimulates CRISPR-Cas 13a activity using an entropy-driven mechanism. The activated CRISPR-Cas 13a can cleave Hoogsteen DNA due to the insertion of two uracil (-U-U-) in Hoogsteen DNA. The DNA tetrahedra changed on the electrode surface and can therefore not construct a three-stranded structure after cleaving Hoogsteen DNA. Significantly, this DNA tetrahedron/Hoogsteen DNA-based biosensor can regenerate at pH = 10.0, which keeps Hoogsteen DNA away from the electrode surface, allowing the biosensor to function at pH = 7.0. We could use this technique to detect the SARS-CoV-2 RdRp gene with a detection limit of 89.86 aM. Furthermore, the detection method is very stable and repeatable. This technique offers the prospect of detecting SARS-CoV-2 at a reasonable cost. This work has potential applications in the dynamic assessment of the diagnostic and therapeutic efficacy of SARS-CoV-2 infection and in the screening of environmental samples.

Entropy-driven assisted T7 RNA polymerase amplification-activated CRISPR/Cas13a activity for SARS-CoV-2 detection in human pharyngeal swabs and environment by an electrochemiluminescence biosensor.

In this study, we introduce an electrochemiluminescence (ECL) sensing platform based on the "Entropy-driven triggered T7 amplification-CRISPR/Cas13a system" (EDT-Cas). This platform combines a programmable entropy-driven cycling strategy, T7 RNA polymerase, and the CRISPR/Cas13a system to amplify the determination of the SARS-CoV-2 RdRp gene. The Ti3C2Tx-compliant ECL signaling molecule offers unique benefits when used with the ECL sensing platform to increase the assay sensitivity and the electrode surface modifiability. To obtain the T7 promoter, the SARS-CoV-2 RdRp gene may first initiate an entropy-driven cyclic amplification response. Then, after recognizing the T7 promoter sequence on the newly created dsDNA, T7 RNA polymerase starts transcription, resulting in the production of many single-stranded RNAs (ssRNAs), which in turn trigger the action of CRISPR/Cas13a. Finally, Cas13a/crRNA identifies the transcribed ssRNA. When it cleaves the ssRNA, many DNA reporter probes carrying -U-U- are cleaved on the electrode surface, increasing the ECL signal and allowing for the rapid and highly sensitive detection of SARS-CoV-2. With a detection limit of 7.39 aM, our method enables us to locate the SARS-CoV-2 RdRp gene in clinical samples. The detection method also demonstrates excellent repeatability and stability. The SARS-CoV-2 RdRp gene was discovered using the "Entropy-driven triggered T7 amplification-CRISPR/Cas13a system" (EDT-Cas). The developed ECL test had excellent recoveries in pharyngeal swabs and environmental samples. It is anticipated to offer an early clinical diagnosis of SARS-CoV-2 and further control the spread of the pandemic.

DNAzyme-driven bipedal DNA walker triggered to hybridize silver nanoparticle probes for electrochemical detection of amyloid-ß oligomer.

Amyloid-ß oligomer has been considered as a promising molecular biomarker for the diagnosis of Alzheimer's disease due to their significant neural synapse toxicity. Therefore, it is essential to create an easy approach for the selective detection of Amyloid-ß oligomer that has high sensitivity and cheap cost. In this work, we developed an innovative enzyme-free electrochemical aptasensor based on the DNAzyme-driven DNA bipedal walker tactics for sensing Amyloid-ß oligomer. Bipedal DNA walkers demonstrate a wider walking region, better walking kinetics, and higher amplification effectiveness than typical DNA walkers. The Mg2+-dependent DNAzyme drove the DNA walker, and the binding-induced DNA walker can sequentially shear MBs and form MB fragment structure. Finally, the detection probes modified AgNPs hybridized with the MB fragment structure, resulting in the multiplication of AgNPs on the electrode surface. Electrochemical stripping of AgNPs was used to test the performance of the obtained electrochemical sensor. In particular, a low detection limit of 5.94 fM and a wide linear range of 0.01 pM-0.1 nM were attained. The detection of Amyloid-ß oligomer in human serum was then carried out using this bipedal DNA walker biosensor, which shown good selectivity and outstanding reproducibility, indicating its usefulness in bioanalysis.